Kamis, 21 November 2013

How to Cook Food in a Hotel Room (with Examples)

Lots of travelers, particularly those on business, find themselves stuck in hotels for weeks or months on end. The novelty of eating every meal at a restaurant or room service soon wears off, and the traveler craves nothing more than the taste of a home-cooked meal. However, in-room resources at many hotels appear to be incapable of facilitating cooking. This can be resolved through several innovative ways.
STEPS
COOKING HELP



Hotel Appliance Cooking List


Sample Recipe for Hotel Meal
METHOD 1 OF 2: BREAKFAST



1
MAKE OATMEAL in the coffee maker. Put two packets of instant oatmeal into the carafe. Add an individual packet of honey, an individual packet of fruit jam, and a pinch of salt. Put an herbal tea bag (e.g. orange flavored) into the filter basket. Pour 8-
1
0 ounces of water into the coffee maker, turn on the machine, and the oatmeal will be ready in about 5 minutes.[
1
]
Even old-fashioned (non-instant) oatmeal can be cooked either with hot water or in a microwave.
No honey? Try cut-up fresh or dried fruit. Raisins, apples, strawberries, and many other choices all add enough sweetness and they tend to be widely available in shops.
2
COOK BACON with the iron. Cut bacon strips in half and place them between two foil sheets. Crimp the edges of the foil sheets together to prevent grease from spilling out. Iron the bacon, opening the packet carefully with a fork every few minutes to check to see if the bacon is done and to let out the steam. It'll take about 10 minutes to get slightly crisp bacon.[
2
]
3
USE THE IRON AS A HOTPLATE FOR EGGS. Prop the iron so that the ironing surface is horizontal. Make a little foil pan and grease it with bacon fat or butter. Crack one or two eggs into it, wait 7-10 minutes (until the eggs hold together), then flip them over to cook on the other side.[2]



4
PREPARE SOFT-BOILED EGGS IN THE COFFEE MAKER. Place the eggs carefully into the carafe and let the hot water drip over them. Then let the eggs sit in the water for a few minutes.[3]
METHOD 2 OF 2: LUNCH/DINNER



1
PREPARE RAMEN NOODLES in the coffee maker. Put the noodles in the carafe. Add enough water to submerge the noodles and turn the coffee maker on. After the water runs through the coffee maker, let the noodles soak in it for about three minutes, or however long it takes for the noodles to soften. Then drain carefully and add the seasoning.[4]
2
MAKE A GRILLED CHEESE SANDWICH USING THE IRON. You can also use the same method to make a quesadilla.[5] There is also the dessert version of grilled cheese, using peanut butter and chocolate chips.
3
USE THE IRON AS A SKILLET/GRILL. Wrap chicken, fish, vegetables, etc. in foil, place the foil-wrapped food on the ironing board, and put the iron, on the highest setting, over the top. Just make sure the foil is sealed so that juices don't come out and ruin the iron or the surface you're cooking on. The more cooking that the food requires, the less room there is for error, so try to stick with food that only needs searing, such as scallops.



4
USE THE COFFEE MAKER AS A VEGETABLE STEAMER. Place carrots, broccoli, etc. in the filter basket of the coffee maker. Run water through the coffee maker several time to achieve desired tenderness.
5
MAKE INSTANT RICE IN THE COFFEE MAKER. Run the appropriate amount of water, per the instructions on the rice package, through the coffee maker and then add the rice to the coffee pot. Leave the burner on until the rice has thoroughly cooked and absorbed most of the water.
6
MAKE SAUCE IN THE COFFEE MAKER. Sauces and fondues can be made by running water through the coffee maker and adding the heated water to a sauce mix. You should not run anything other than water through the coffee maker. These machines are made to heat water only, and the water comes into direct contact with the heating element. Sauces will burn onto the heating element, ruining the coffee maker.
7
MAKE "LEMON PEPPER CHICKEN" IN THE COFFEE MAKER. Place chicken breast in coffee maker. Add enough water to cover about 1/4 of chicken. Sprinkle with lemon pepper seasoning. Turn on maker and cook about 15 min per side. Add milk and butter to remaining liquid, allow to heat for about a minute, and add potato flakes for a quick side of mashed potatoes.
8
KEEP UNCOOKED OPTIONS IN MIND. You can make a salad easily, by washing the ingredients in the bathroom sink, and you can make your own sandwiches from supermarket ingredients or, in many cases, buy ready-made.
VIDEO
{{{1}}}
TIPS
After you're finished with the coffee maker, clean it thoroughly.
These tactics may also prove helpful to a college student living in a dorm with strict regulations.
Plates, cups, utensils, and condiments can often be obtained if your hotel has a breakfast buffet.
For lighter fare when traveling, or to reduce your budget, aim for one larger restaurant meal per day. Lunch is ideal, because it is often lighter and less costly to order in a restaurant than dinner, and it is when you are most likely to be away from your hotel. For your restaurant meal, choose foods you cannot prepare as easily for yourself. Then, prepare simple, lighter meals for morning and night. Eggs, bread, and hot or cold cereal are relatively easy breakfasts to prepare on the go, and sandwiches, canned soups, and prepared foods can combine to make simple dinners.
Use the ice bucket as a salad bowl, but clean and disinfect thoroughly first. Ice buckets can harbor plenty of bacteria.
You should first practice at home.
If you want to cook for yourself, plan ahead a little. See if you can find a hotel, hostel, or extended stay place that has some cooking facilities. Many hotels do offer microwaves, toaster ovens, and even mini-fridges in the rooms. Many hostels offer communal kitchens. Long-term stay places have studio apartments with kitchenettes. Any of these options expands considerably the range of cooking options you will have available.
WARNINGS
KEEP IN MIND THAT COOKING IN HOTEL ROOMS USUALLY VIOLATES MOST HEALTH CODES. If you get caught cooking in a hotel room, you may have to pay fines, replace appliances, and/or be evicted from the hotel. You are far better off booking a hotel room that has a kitchenette (microwave, fridge, stove/oven, etc.) than attempting anything outlined in this article.
If you ruin something that the hotel owns, the hotel will charge a LOT to replace the broken item. So be careful!=
While cooking, do not leave electric devices unattended even for a short time.
Be aware that the hot iron does present a fire hazard. Make sure to use extra caution and never let children cook alone.
Clean out the coffee pot and filter before attempting to cook with it. You don't want your steamed cauliflower to taste like three week old coffee!
If the coffee pot has a dark, reddish-orange stain, it might've been used to brew methamphetamine, and the resulting coffee could be hazardous to your health. If there's a chemical smell in the room, that's another red flag.
You're really supposed to ask the hotel permission if you can do this (to which they'll probably say no).
Do not allow any uncleaned surface or appliance to contact food which you intend to eat.
After use, thoroughly clean anything -- especially the coffee maker and iron -- which has contacted raw poultry or meat, as failure to do this may result in salmonella.

How to Access Bookmarks on Pandora (with Pictures)

Pandora is an Internet radio station users can personalize according to their tastes in artists, songs, and genres. When you visit Pandora's website at www.pandora.com, you can type in the name of an artist or song you like listening to and the website will choose and play music that is similar to your tastes. In Pandora, Bookmarks are used for remembering specific songs or artists so you can learn more about them or purchase their music at a later time. Here are steps on how to access your Pandora Bookmarks after you have created them.
STEPS



1
LOG IN TO YOUR PANDORA ACCOUNT. Visit www.pandora.com to log in to your personal account using the email address you registered with along with your password, and click on "Sign In."



2
ACCESS YOUR PANDORA BOOKMARKS FROM A COMPUTER, IPHONE OR IPOD TOUCH.
To access your bookmarks from a computer, you will immediately be directed to your Pandora Listener Profile Page upon logging in to your account. In the upper left corner, click on the "Your Profile" button. A separate pop-up window will appear with the details of your profile and display lists of the tracks and artists you have Bookmarked.
To access your Bookmarks from the iPhone and the iPod Touch, touch the arrow in the upper left corner from the "Now Playing" screen. Touch the "Bookmarks" tab on the bottom of the screen to display your Bookmarks.



3
MANAGE YOUR BOOKMARKED TRACKS AND ARTISTS FROM A COMPUTER.
Print a list of your Bookmarks or share them in an RSS Feed. The print and RSS Feed icons are located in the upper right-hand corner of the "Bookmarked Tracks" section. Click directly on the icons to activate each feature.
Sort your Bookmarks by artist name, song title, or by the date you bookmarked that item. To the right of the "sort by" field, click on either the "Track," "Artist," or "Date Added" links.
TIPS
You can play samples of the songs in your Bookmarks by clicking on the tiny icon resembling a play button to the left of the song title under the "Bookmarked Tracks" section.
If you want to purchase a song from your Bookmarks, Amazon and iTunes icons are located to the right of the song title under the "Bookmarked Tracks" section. Clicking on the icons will take you directly to the website to purchase the song, and will open the session in a new browser window.
Each track and artist listed in your Bookmarks section is a hyperlink you can click directly on to read more about the music or artist, including a section for comments. Clicking on one of these links will open the session in a new browser window.
WARNINGS
Bookmarks are currently not accessible on Blackberry, Android and iPad devices. Pandora users with these devices should manage Bookmarks from a computer instead.
If your Pandora profile is set to Private, you will not be able to utilize the RSS Feed sharing feature for your Bookmarks.

How to Begin Tatting: 7 Steps (with Pictures)

Tatting is an old craft used to make a type of lace. Tatting has experienced numerous periods of popularity, including during Victorian times and the 1950s and 60s. The English name of tatting is said to be derived from "tatters" and to denote the frail disconnected character of the fabric.[1] In recent years, it has been revived again with great enthusiasm. Tatting can be a very fulfilling hobby - it is easy to learn (contrary to how you might feel when viewing the incredible complexity of designs that result from tatting projects) and there are a vast array of projects available to the avid tatter. Tatting designs are elegant, dainty and useful in one - tatting projects include doilies, runners, collars, table covers, handkerchiefs, pillow edgings and more. If you're just starting out with tatting, this article aims to provide the basic overview before embarking on a project.
STEPS



1
FAMILIARIZE YOURSELF WITH THE THREADS USED FOR TATTING. Suitable threads include crochet cotton and mercerized cotton. DMC is one popular brand known for its tatting threads. Threads can be purchased online as well as in craft stores. (NOTE: When teaching someone to tat, I accidently found if you use two colors of thread, one in the bobbin and another for the ball, you can quickly see if an error has been made. When done correctly, the work should all be one color. If you see two colors, you know somethings was done wrong.)



2
OBTAIN SOME TATTING SHUTTLES. Old shuttles used to be made of bone, tortoiseshell, Bakelite or steel. Modern shuttles are made from plastic. You may be able to collect older versions, although obtaining tortoiseshell shuttles can be difficult due to endangered species regulations. Start with modern ones and if you get a passion for tatting, you might even discover a passion for collecting old shuttles for display!



3
LEARN HOW TO WIND THE SHUTTLE. Wind the thread around the bobbin that is situated in the center of the shuttle. If there is a hole in the center of the shuttle, insert the thread through the hole and tie a knot before commencing your project. Note that in some instances, the bobbin is removable. Do not wind the thread beyond the edge of the shuttle.



4
PRACTICE USING THE SHUTTLE. This is explained in illustrated detail at Use a Tatting Shuttle. A brief outline is provided here for the sake of completeness.
Take a shuttle with a pointed end and 2 balls of mercerized cotton. Wind as described above.
Take the shuttle in the right hand, between the thumb and second finger, and allow the forefinger to remain at liberty.
Rest the under side of the shuttle between the second and third and on the middle finger.
Place the thread round the three middle fingers of the left hand, so as to form a loop, keeping the second and third fingers a little apart, and bring the cotton again between the thumb and forefinger, letting the end fall within the palm of the hand, while the end of cotton which holds on to the shuttle passes over the thumb-nail.



5
TRY A VARIETY OF TATTING STITCHES. Once you have familiarized yourself with the above information, commence with the basic stitches, such as double stitch, rings, chains etc. This will get you used to how tatting feels and establish your own manner before you embark on projects.



6
UNDERSTAND HOW TO USE REVERSE WORK. In tatting you will notice that the rounded end of the loop on which you are working faces the top. However, you can produce an interesting effect by turning your work first up and then down. The directions will say "rw" (reverse work). To do this, once you have worked a ring, turn it so that the base of the ring faces the top and the new ring is worked as usual with the loop side up.



7
START YOUR FIRST TATTING PROJECT. Start with edgings and insertions first. Check out wikiHow's Tatting category for many ideas.
TIPS
If you use two colors of thread, one in the bobbin and another for the ball, you can quickly see if an error has been made. When done correctly, the work should all be one color. If you see two colors, you know somethings was done wrong.
Learn the relevant tatting abbreviations:
_r_ - ring
_lr_ - large ring
_sr_ - small ring
_ds_ - double stitch
_p_ - picot
_lp_ - long picot
_sm p_ - small picot
_sep._ - separated
_cl_ - close
_rw_ - reverse work
_sp_ - space
_ch_ - chain
Tatting differs entirely from crochet, and is composed of stitches forming knots. It is intended to be an imitation of point lace, and it is often used for trimming under linen, on account of its strength.
If collecting old tatting shuttles is a passion with you, note that some were made from ivory and tortoiseshell. When you collect these, ensure that they are VINTAGE and obtain them LEGALLY from antique specialists only. Do not purchase new ivory or tortoiseshell, as this breaches the laws on protecting endangered species and encourages illegal poaching of disappearing species. Other older forms of shuttles include bone, mother-of-pearl or even wood with inlaid designs. Collecting shuttles can be an enjoyable pastime for the vintage sewing enthusiast.
Note that "purl" is sometimes the term used to refer to a Josephine picot or knot. In many Victorian-era patterns, it is used to indicate a picot.

How to Become a Pixel Artist: 5 Steps (with Pictures)

Pixel Art is a form of electronic art created using a computer and a drawing software. It's associated with creating a picture by filling it in, pixel by pixel, rather than using graphic tools. In this guide, we will be using MS paint, available on any Windows computer (3.0x and up) to create your very own pixel images.
STEPS



1
BECOME FAMILIAR WITH COLORS. Color is one of the most important parts of your image in terms of effect. Even black-white images have different shades of gray, which can be counted as color. In MS paint, as in most graphics programs, an advanced color picker is available. Let's call it RGB/HSL box. So, to open up RGB/HSL box, just double click any color, or click "colors" and select "edit colors" from the menu bar. Click "Define Custom Colors". Here, you see 6 text boxes: Hue, Sat, Lum and Red, Blue, Green. After experimenting with each, you will be able to figure out what they do. You can also change those values by moving the "target" on around a big color map and by moving the black arrow up and down, you can change the luminosity of the color. Experiment with the RGB/HSL box and then move on to next step.



2
LEARN TO DITHER. Dithering is a technique that blends your colors together, making them look smoother, or just creating interesting textures. There are 3 types of dithering: Basic dithering, stylized dithering and anti-aliasing. You will only learn basic dithering here, but it is easy to learn other two thereafter.
Basic dithering is a 2x2 checkerboard pattern that is created outside of the color to make it blend with the other, lighter color (or darker) color. You can practice dithering by applying more or less to the image. See what the results look like.


Once you master basic dithering, you can move on to stylized dithering, which instead of a checkerboard pattern, creates a random pattern of dots held together. It is used to create textures and more effects.


Anti-aliasing is used on lines to make them smoother. You will not need it in basic pixel art, although sometimes it can be useful.





3
PRACTICE SHADING AND LIGHTING. When shading objects, you must always consider the lighting point, or sun. Once you decide where it is, imagine that object is in real life and shade it the way it would be shaded in real life. Decrease lum value of a color by
3
0 and increase hue by 5 and shade the area in. Then, dither it so the colors blend. Now, modify the shaded color: decrease lum value by
3
0 and increase hue by 10. Shade the area inside the shaded area; however, make it small, like 2 pixels or so. Then, dither. Now, depending on what material you're drawing (shiny or not), you need to add in lighting. This is done by increasing original color by 40 or 50 (whichever one looks better) and drawing a line or a little circle opposite from the shaded areas. It has to be about 2 pixels away from the outline and it should look real. Again, use dithering to fit it in.



4
DRAW LINE ART. Line art is the main part of your objects: it's the outline. Think of an object. Then, zoom in and draw the object, pixel by pixel. The only way you can get better at line art is if you practice a lot. Now, you can start colouring in the image using your techniques.



5
SAVE YOUR MASTERPIECE. PNG and GIF formats are preferable over JPEG because they preserve the colors efficiently, rather than creating a "muddy" look. Whereas a BMP would preserve the image, it does not compress it at all and could have a very big file size.
TIPS
Look at other pixel art works. Paste them in Paint, zoom in and see how they're made. Study them to learn about new techniques but don't plagiarize.
Learn photo manipulation. Use a photo you took yourself or get permission to use someone else's photo. Paste the photo in Paint and make it smaller. Then, outline it. After that, erase the entire inside. Re-shade it so it looks pixelish.
A great way to test out pixel art is to find out the resolution of your mobile phone screen. You can find this out in your manual or even on the phone websites.
Animations can be created in Photoshop and Gimp, which can also be played on mobile phones, msn and blogs.
Isometric pixel art is used to provide a 3-dimensional view without actual 3-dimensional processing. Objects are drawn from 26-30 degree angle although some isometric works are drawn from a 90 degree angle.
Try to make SAT values of your colors under 150 because above 150, your colors start to look too bright.
You don't have to use ms paint to create pixel art. You can use programs such as Photoshop, Gimp 2 OR for mac Pixen. Most companies that use pixel art (eg, mobile phone games) use photoshop purely for the speed. A tint can be applied over a piece of work rather than changing every single pixel to a different colour eg for water.
K.I.S.S! Keep it simple, stupid! Keep the number of colours to a minimum. Pixel art is created for devices with low processing power so the more info in the file, the harder the device has to work.
Be creative.

How to Publish an Online Magazine Using Social Media, Blogs and a Website

Do you have an idea for publishing an online magazine? This is one of the easiest tasks to do if you follow the steps mentioned below.
STEPS
1
IDENTIFY THE THEME AND NAME OF YOUR MAGAZINE, IF YOU HAVEN\'T ALREADY.
2
REGISTER A DOMAIN NAME (WWW.YOURMAGAZINE.com) for your magazine (search Google for domain registration). It should cost you around 10 USD a year to register a domain name. If you want to avoid the cost of domain name, you can also go for sub domain name (YOUR MAGAZINE.somedomain.com).
3
SELECT THE BLOGGING PLATFORM WHERE YOU WANT TO PUBLISH YOUR MAGAZINE. You need a Content Management System (CMS) to publish magazine articles, and blogging is one of the simplest yet most powerful CMS. It can be sufficient for publishing an online magazine. There are many powerful blogging platforms, some of the more popular ones being Blogger (easier to use has support from Google) and WordPress (customizable for advanced features).
Decide if you want to have your own hosting service or free hosting service. If you want your own hosting service, WordPress would be your choice as Blogger does not provide options for separate hosting. Hosting services might cost you 3.75 USD per month or above based on the plan and options you select. Or, you can use the free hosting platform using a sub domain or configuring your full domain name.
4
GET A THEME FOR YOUR ONLINE MAGAZINE. The magazine themes should have a different look and feel than any other blog. You can search for free magazine themes for WordPress, Blogger, or any other platform you use in Google. You can also pay and get a customized theme designed for your magazine.
5
ADD AUTHORS TO YOUR MAGAZINE. Both WordPress and Blogger allow you to add authors for your blog. This way you can have a team of people who write for your magazine.
6
WRITE ARTICLES AND PUBLISH THEM ON YOUR BLOGGING PLATFORM.
Know another method for How to PUBLISH AN ONLINE MAGAZINE USING SOCIAL MEDIA, BLOGS AND A WEBSITE? Add it here... 1. Add Method
TIPS
Adjust the width and height to improve the look and feel of your webpage.
Copyright your content before making it public.
Learn tips and tricks on search engine optimization available online so that your magazine becomes more visible in search engines.
If you opt for a hosting service, then you might not need to book a domain name. If you search for domain hosting in Google, you might find a hosting provider including a free domain name with their hosting plan.

Rabu, 20 November 2013

How to Make Money With a Web Server with WebHostingTalk.Com

Making money from a webserver is a very profitable business. As websites numbers grows everyday on the web, the market is big enough to share with everyone.
STEPS
1
GET A DOMAIN NAME, CHOOSE A DOT COM HAVING THE KEYWORD HOST, HOSTING, SERVER, SOLUTIONS OR OTHER THAT DESCRIBE YOUR BUSINESS.
2
FIND IN GOOGLE OR SEARCH ENGINE FOR: hosting reseller, choose the best one you think is according to reviews and your budget.
3
MAKE SURE THEY HAVE RESELLER PANEL (WHM, WHMCS,...= for you to manage your customer accounts.
4
JOIN A HOSTING COMMUNITY LIKE WEBHOSTINGTALK.com to get advice about setting up your business to make money with your web server.
5
BUY A WEB HOSTING TEMPLATE OR CREATE ONE IF YOU HAVE WEB DESIGN SKILLS AND UPLOAD TO YOUR WEBHOSTING FOLLOWING INSTRUCTION OF THE RESELLER HOSTING COMPANY YOU HAVE CHOSEN.
6
SET YOUR PRICE AND EVERYTHING ELSE IN YOUR RESELLER HOSTING PANEL TO BE READY TO TAKE ORDER.
7
DO SOME MARKETING TO PROMOTE YOUR BUSINESS.
Know another method for How to MAKE MONEY WITH A WEB SERVER WITH WEBHOSTINGTALK.COM? Add it here... 1. Add Method
TIPS
Webhostingtalk.com is full of resources for making money with a web server.
Start small first, avoid VPS and Dedicated server offers if you are starting, reseller hosting is a great start you could always upgrade later.
If you have web design skills, make your business as a web designer not web hosting, then charge them web server space disk for their site hosting.
WARNINGS
Don't go with bad reputation reseller hosting are you'll be in trouble and will hurt your business. Make sure they are well known and have 24/7 services and support online.
Don't try to price your hosting plans too low, make sure to make money, don't be afraid of competitors with dollar hosting and unlimited disk space and bandwidth, they do not make money and customers don't trust these hosting companies. Most goes out of business in less than a year so you can too if you follow their pricing.
Don't get any kind of customers, read the rules and policies of your webhosting reseller company, hosting hackers sites, illegal datas, copyrighted materials... is real danger.
ARTICLE INFO
Categories: Online and Home Businesses
Recent edits by: Carolyn Barratt, Teresa
Discuss
Email

4 Ways to Make a Duct Tape Purse

If you want to make a big statement at your next party, a duct tape purse is just the ticket. Duct tape purses are a cheap and easy way to stand out from the crowd, and making accessories with duct tape has become surprisingly trendy. Follow these steps to learn how to make a duct tape purse.
STEPS
METHOD 1 OF 4: STANDARD HANDBAG



1
BUY SEVERAL ROLLS OF DUCT TAPE. It now comes in a variety of colors (and patterns!) as well as the standard gray.
Duct tape has so many uses it's now available just about anywhere. Wal-Mart has a good selection and each roll runs at about $5.00 right now.
Feel free to choose as many colors or patterns as you desire. You could also place a different color on the inside.



2
CUT A PIECE OF CARDBOARD INTO FIVE PIECES. The five pieces will be the bottom, large sides and small sides of your duct tape purse.
The size of the purse is entirely up to you; just make sure the sides match up and fit with the bottom.



3
COVER EACH PIECE OF CARDBOARD IN DUCT TAPE. Cover it fully, making sure that it is all gray (or whichever color you've chosen) by the time you're done.
To cover a corner, run over it with duct tape and cut the tape so that you form a good, neat corner.



4
ASSEMBLE YOUR PURSE. Once you've covered all your pieces, put everything together by placing the pieces on the bottom of the purse and taping them on.



5
MAKE YOUR STRAP. To do this, take two pieces of tape and cut them to the length you want. Now place them together, leaving a little space.
This space, once folded over, will keep your strap from feeling sticky. Now just tape the strap to the bottom of the bag.
METHOD 2 OF 4: WITH FABRIC
1
CUT A PIECE OF FABRIC FOR THE INSIDE OF YOUR PURSE. Remember, your purse will be half this size.
Avoid fabrics that are too thin or sheer. Your tape needs something to cling to and shouldn't let the duct tape show on the inside.
2
TAPE YOUR FABRIC FACE DOWN ON A CLEAN SURFACE. This makes it secure when you're working with the tape.
Decide what kind of colors and patterns you want for your purse before you go any further. You are not limited to vertical or horizontal strips; make any pattern you want or cut up the tape into shapes.
3
COVER YOUR FABRIC WITH YOUR TAPE IN THE DESIRED PATTERN. The tape should cover all of the fabric and leave none exposed.
Go past the fabric an inch (2.5 cm) or so. Taping to the table or floor should not be an issue (use a clean surface!).
Overlap the tape as uniformly as possible.
4
CUT OFF THE EXCESS TAPE ALONG THE EDGE. Peel your piece off your surface and turn it over, fabric side up.
Turn over your purse. You should see a giant rectangle of duct tape.
5
TAPE UP BOTH SIDES OF YOUR PURSE. Don't tape up the top!
This serves as the seam and can be a completely different color or pattern of tape.
It's easier to lay the duct tape (the seam) sticky side up on the table and put the purse on top to meet it.
Trim the excess with scissors.
6
TUCK IN THE EDGES OF THE SEAM. This is the trickiest part.
Before you insert the seam into the bottom of the bag, fold it onto itself to make it un-sticky. _Then_ insert it; it should be much easier to manipulate.
The seam should be tucked into the fabric, disappearing.
7
TAPE THE INSIDES OF YOUR PURSE AND ALONG THE TOP EDGE. This gives it structure.
Tape along the bottom one strip of duct tape. This gives it a base.
Tape one strip along each side. This gives it a sturdy left and right.
Tape along the top to remove any rough edges.
8
COVER A PRE-MEASURED ROPE IN DUCT TAPE. This serves as your strap.
Make it a bit longer than you need; a bit will be used to be knotted or taped to the inside.
9
PLACE YOUR GROMMETS IN THE DESIRED POSITION. There should be simple directions on the package.
If you don't have grommets, you can stick to a plain duct tape strap. Duct tape is very sturdy and won't budge; however, grommets give your purse a more professional look.
10
INSERT THE STRAP INTO THE GROMMETS AND SECURE. Tada! Your duct tape purse is complete.
Tape the rope in place or tie in a knot to secure.
METHOD 3 OF 4: WOVEN
1
MAKE THE HORIZONTAL STRIPS. They should be
1
2 inches long and serve as your secondary color.
Use a ruler for an exact measurement.
Fold each strip in half LENGTHWISE. Try to be diligent in folding; the opposite side of the duct tape is a different color and will be seen.
Repeat this 23 times. That's right, 23. Use a different color on occasion if you see fit.
Put weights on them (books, stacks of paper, boxes) to flatten them out.
2
MAKE THE VERTICAL STRIPS. Measure out
2
5 inches (63.5 cm) of your _main_ color.
Fold each strip in half, just like you did with the horizontal strips. Do this 12 times.
Cover all straps with weights for around an hour to flatten completely. They'll be easier to work with.
3
CONSTRUCT THE SEAM. Rip off a piece of duct tape from your main color that's about 14 inches (
3
6 cm) long.
Fold it in half sticky side OUT and make a crease.
Line all 12 of the vertical strips along the crease. Get them up close and personal to each other.
Reverse the seam and fold along the crease, adhering the ends together.
Do this for both sides.
4
START WEAVING. Make sure each strip is snug in its place.
For weaving, go under, over, under, over for the first strip and then over, under, over under for the second. Repeat.
Throw in a different color here and there to mix it up.
5
COVER WHAT YOU\'VE DONE WITH YOUR HORIZONTAL STRIPS. This should go on the BACK of your purse. It acts as a liner.
Be as straight as possible--the strips will create lines.
Don't skip this part; the liner makes your bag much sturdier.
Continue weaving and constructing the lining as you go until you meet the far seam.
6
ADD A STRIP ALONG THE LONGEST EDGE. Leave half of the strip hanging, exposed.
Flip the entire piece over and fold the hanging edge over, taping it to the opposite side of the bag.
Repeat for both sides.
7
MAKE TWO STRIPS THE HEIGHT OF YOUR BAG. These will serve as the sides. They should be at least 4 inches (10 cm) wide and 8 inches (20 cm) tall.
Fold your strip in half _sticky side out_. Lay on another strip sticky side up touching the upper, sticky edge of your first piece.
Unfold the bottom piece so that the two pieces are totally stuck together. Fold the top sticky part over the middle, so that there is only sticky on the bottom edge.
Flip it over and repeat.
If you're lost, we understand. Basically, halfway overlap the pieces of tape, flip it, halfway overlap them again and repeat until it is the size you want.
With the last one, fold it down so you have a sheet with no sticky band at the top or bottom.
8
TRIM DOWN THE EDGES. You want your sides to be a bit bigger at the bottom than at the top.
Like a triangle...but not quite. The two sides should come to a point if the piece were to go on.
9
TAPE THE SIDES TO THE INSIDE OF YOUR PIECE. Count 8 strips in for centering.
This will not be centered; one side is supposed to be longer than the other.
10
PLACE A STRIP ALONG THE BOTTOM OF THE SIDE TO THE TOP EDGE OF THE PURSE. This will adhere the sides together.
Fold it in half sticky side out.
Connect the sides together. Repeat this three more times.
11
COVER ALL THE EDGES WITH A STRIP OF YOUR PRIMARY COLOR. This hides any pieces that wound up not completely straight.
One side should be longer than the other. It's a flap-top purse; the longer side serves as the cover.
Attach velcro to keep the purse from opening needlessly.
12
MAKE THE HANDLE. Cut three strips a bit longer than half the length you want the strap to be.
Lay one down, sticky side up. Cover half of it with another strip, sticky side down. Fold one half over the other.
Flip the piece and cover the now-exposed sticky edge half way with the third sticky piece.
Flip over again and fold the edge down so there are no exposed edges.
Tape the two pieces together and tape them to the inside of the bag.
METHOD 4 OF 4: AN INNER POCKET
1
CONSTRUCT A PIECE LIKE THE SIDE OF THE PURSE. It should be a bit smaller--around 6 inches.
Do not taper the edges like you did the side; it should stay in a rectangle shape.
2
ADD ANGLED BANDS TO EACH SIDE. This is the inner side of your pocket.
Add a sticky band to the bottom. Take a 6 inch piece and put it half on, half off the bottom of your little square. Trim it to an angle.
Cut with the sticky side of the tape up. It's easier to cut and leaves less residue on your scissors.
Flip over and fold these edges in half onto each other. What you end up with should resemble an envelope, sticky sides on the edges.
3
STICK IT ONTO THE INNER LINER. Place it as high or low as you please.
Secure the edges with extra duct tape. If you don't, the pocket will fall off eventually.
VIDEO

TIPS
Make sure each piece is completely covered in duct tape. If a piece is partially uncovered, it will spoil the look of your new purse.
Make sure your pieces fit together. When measuring your cardboard pieces, make sure the bottom of the purse is big enough to accommodate all of your sides.
You can make this purse a messenger bag by adjusting the sizes of all the pieces of cardboard.
Use scissors you don't love. After this project, they may be permanently sticky.
WARNINGS
Use caution when working with a straight razor.
THINGS YOU\'LL NEED
METHOD ONE: STANDARD HANDBAG
Cardboard
Duct tape
Razor blade
Ruler
Scissors
METHOD TWO: WOVEN
Fabric
Duct tape
Scissors
Rope
Grommets
INNER POCKET
Duct tape
Scissors
SOURCES & CITATIONS
http://www.allthingsthrifty.com/2010/09/tutorial-how-to-make-duct-tape-purses.html
http://diannadesigns.wordpress.com/tutorials/woven-duct-tape-purse/